Manufacturer:
Gaucho Ninja Limited
Unit 2B, The Laurels Park
Kingstone, HR2 9NF
Herefordshire
United Kingdom

Product Name:
Sneaky Ninjas Safety Chelsea Boots

Product Category:
Protective Safety Footwear

Country of Manufacture:
Made in Turkey

Country of Design:
Designed in the United Kingdom

We declare under our sole responsibility that this product complies with the applicable essential health and safety requirements of relevant legislation and standards.

Applicable Standards

European / UK Standard

EN ISO 20345:2022
Classification: SB A PS FO SR HRO

Meaning:

• SB – Basic safety requirements with protective toe cap
• A – Antistatic properties
• PS – Penetration resistant insert (non-metallic)
• FO – Fuel and oil resistant outsole
• SR – Slip resistance on tested surfaces
• HRO - Resistance to Hot Contact

USA Standard

ASTM F2413-24
Classification: I/C PR SD10

ASTM F3445-24
Classification: SRO

Meaning:

• I/C – Impact and Compression resistant toe protection
• PR – Puncture resistant sole
• SD10 – Static dissipative footwear
• SRO – Slip resistant outsole

Intended Use

This footwear is designed for occupational environments requiring toe protection, puncture resistance, and slip resistance while promoting natural foot function.

Care & Maintenance

• Clean with a soft brush or damp cloth
• Dry naturally away from direct heat
• Inspect regularly for wear or damage
• Replace footwear if protection is compromised

Storage

Store in a dry, ventilated place away from direct sunlight or excessive humidity.

Traceability

Refer to the batch code printed inside the product tongue label.

Sneaky Ninjas Barefoot Safety Chelsea Boots 2.0

The Sneaky Ninjas Barefoot Safety Chelsea Boots 2.0 bring engineered safety performance to a low-profile trainer built for barefoot movement. Created for professionals who need serious protection without sacrificing comfort, mobility, or a natural gait.

Key Features

Wide Toe Box

Allows natural toe splay and improved balance.

Metal Free.

Zero Drop Sole

Flat from heel to toe to encourage natural posture and movement.

Protective Toe Cap

Impact and compression resistance built into every pair.

Puncture Resistant Layer

Flexible underfoot protection against sharp hazards.

Slip Resistant Outsole

Confident grip on wet and oily surfaces.

Fuel & Oil Resistant Sole

Built for industrial use.

Static Dissipative Construction

Safely disperses static charge underfoot.

Heat Resistant Outsole

Withstands brief contact with hot surfaces.

Engineered to EN ISO 20345:2022+A1:2024, ASTM F2413, and ASTM F3445 — Safety Footwear Category SB, Class 1.

Comfort Benefits

Unlike conventional narrow safety trainers, the Sneaky Ninjas Barefoot Safety Chelsea Boots 2.0 are built to let the foot move as it was designed to, shift after shift.

Sizing

Available in multiple sizes. Please refer to the official size guide on the product page.

Support

For fit advice or customer support, contact us through the Gaucho Ninja website.

We make footwear that protects your feet without fighting against them.

Born from traditional shoemaking and shaped by years of craftsmanship, Gaucho Ninja creates barefoot footwear that balances health, function, and timeless design.

Our Philosophy

Natural movement matters. Your feet were designed to move, spread, flex, and support you. We build shoes that respect that design.

Designed in the UK

Each model is developed with a focus on performance, comfort, and honest craftsmanship.

Made with Care

We work with specialist manufacturing partners to produce footwear to demanding standards.

Independent Brand

Gaucho Ninja is an independent company built through craftsmanship, innovation, and a passion for better footwear.

Use

• Wear with suitable work socks.
  
• Ensure correct fit and secure lacing before use.
  
• Use only for occupational environments requiring certified protective footwear.
  
• Always select the correct size to maintain proper toe cap positioning.
  

Restrictions of use

• Not suitable for environments requiring waterproof certification (WR).
  
• No metatarsal, chainsaw, chemical, or electrical arc protection.
  
• No insulation against extreme heat or molten metal splash.
  
• Do not modify, drill, cut, or alter the footwear. This may void certification.
  

Cleaning

• Remove loose dirt with a soft brush.
  
• Clean with a damp cloth if required.
  
• Do not use solvents, bleach, or aggressive chemicals.
  

Drying

• Air dry naturally at room temperature.
  
• Keep away from direct heat sources such as radiators, fires, or tumble dryers.
  

Disinfection

• Use non-aggressive, alcohol-free products suitable for leather footwear.
  
• Test on a hidden area first.
  

Maintenance and overhaul

• Inspect regularly for excessive wear, sole separation, puncture damage, or upper damage.
  
• Replace immediately if protective performance may be compromised.
  
• Repairs (including resoling) should only be carried out by qualified professionals using suitable materials.
  

Storage

• Store in a cool, dry, ventilated place.
  
• Avoid prolonged sunlight, humidity, or crushing loads.

This PPE is designed to help protect against:

• Impact and crushing injuries to toes
  
• Underfoot puncture from sharp objects
  
• Slipping on occupational surfaces
  
• Static build-up discharge
  
• Contact with oils and fuels
• Contact with hot surfaces
  
• General workplace hazards requiring toe protection
  

Residual risks remain depending on environment and user behaviour.

This PPE complies with:

Regulation (EU) 2016/425 on Personal Protective Equipment.

Where applicable, UK legislation relating to PPE conformity assessment also applies.